3/4" Oxygen Barrier Radiant Pex (500Ft)
By Off-Grid Supply
$610.00
- SKU:
- 7891580
- Width:
- 32.00 (in)
- Height:
- 32.00 (in)
- Depth:
- 8.00 (in)
- Shipping:
- Calculated at Checkout
Financing Available!
500ft roll of 3/4" PEX Tubing with Oxygen Barrier for use in radiant heating applications.
Applications:
3/4" PEX Tubing with Oxygen Barrier can be used for the following heating applications:
- Structural Concrete Slabs (Rebar or wire mesh reinforced, 4-6" thick). Slab-On-Grade Systems (larger garages, warehouses and other storage and commercial facilities). 3/4" PEX Tubing is secured on top of the reinforcement with wire ties, zip ties or clips.
- Snow Melt Systems (reinforced structural slabs). Similar to radiant heated slabs, but does not require insulation and requires a proper drainage system.
- Copper tube finned baseboard radiators, cast iron and aluminum radiators.
- Fan coil units and water to air heat exchangers.
Compatibility:
Oxygen Barrier PEX Tubing can be installed using either Crimp type connection system (Crimp Tool, Crimp-style PEX Fittings and Copper Crimp Rings) or Clamp/Cinch type connection system (Clamp Tool, Crimp-style PEX Fittings and Stainless Steel Clamps). Also compatible with Push-Fit connection system (such as SharkBite), Viega Press type system and Compression type PEX fittings.
This product is a replacement for:
- Watts (RadiantPEX): PB032121-500
- Viega (ViegaPEX): 11458
- Zurn (ZurnPEX): QHR4PC500FX
PEX Tubing colors and packaging may vary by manufacturer.
3/4" PEX Tubing with Oxygen Barrier is the most popular size for all snow melt projects.
According to RPA Standard Guidelines, 500ft is the recommended circuit length for the 3/4" Oxygen Barrier PEX Tubing, when used for radiant floor heating applications. For snow melt applications, 300ft length is considered more appropriate.