4" Submersible Motor - Pentek P42B0005A2-01 XE Series 1.5 HP 230V 2-Wire 1PH
By Pentair
$720.00
- SKU:
- 1572725
- Width:
- 3.00 (in)
- Height:
- 4.00 (in)
- Depth:
- 11.00 (in)
- Shipping:
- Calculated at Checkout
Financing Available!
Sta-rite Pentek XE Series Submersible 4" High-Thrust Motor
This motor is designed for high-thrust water well applications. It features laser-welded 304L stainless steel construction, higher thrust capacity, and higher efficiency. The XE motor incorporates "encapsulated, epoxy stator design," and professional grade Class F insulation providing longer life in harsh environments.
Features
- All stainless-steel exterior construction
- 700# rated Kingsbury thrust bearing design provides many years of trouble-free service under severe-duty operation
- Maximum water temperature is 86°F
- Thrust load capacity is 700 lbs
- Insulation Class F, 311°F
- 2-Wire Permanent Split Capacitor design insures quiet operation and improved operating efficiency
- Equipped with surge arrestor to provide maximum protection against lightning, transient and voltage surge conditions
- Automatic thermal protection
- Cable is field-serviceable, controlled compression design, UL and CSA Approved
- 100% factory pressure and run tested
Applications
- Residential
- Industrial
- Commercial
- Multiple housing
- Farm clean water use
Specifications
Brand | Sta-Rite |
Mfg. Number | P42B0005A2-01-C |
Series | Pentek XE |
Product Type | Motor |
Application | Water systems |
Horsepower | 1/2 HP |
Voltage | 230 volts |
Phase | 1 |
Power | 0.37 kW |
Fequency | 60 Hz |
Service Factor | 1.6 |
Full Load Current | 3.7 Amps |
Max. Load Current | 4.7 Amps |
Locked Rotor Amps | 19.5 Amps |
Main Resistance | 4.5 - 5.2 Ohms |
Thrust Rating | 700 |
Design | Water-filled |
Motor Construction Material | Stainless steel |
Motor Shaft Material | 17-4 precipitation hardened stainless steel |
Motor Type | 2 Wire |
Max. Water Temp | 86°F |
Length | 11 in. |