Bindicator Bin level Sensors

Product Brochures

Specification

-Power Requirements Universal: (± 10%), 120-240 VAC 50/60 Hz or 24-48 VDC
-Temperature - Electronics: -40º to 158º F (-40º to 70º C)
-Temperature - Fork: -55º to 302º F (-48° to 150° C) depending on fork
-Output: 8 A DPDT @ 240 VAC or 30 VDC (resistive)
-Pressure Rating: Up to 150 psi (10 bar)
-Sensitivity: Adjustable; bulk density down to 0.5 lbs/ft3 (8 kg/m3)
-Maximum Particle Size: 3/8 in. (9.5 mm)
-Remote Electronics Distance: Up to 100 ft (30 m)

The Roto-Bin-Dicator® is the most universal of all level sensing technologies and is the most popular level switch used in dry bulk materials. The Roto-Bin-Dicator® is a rotating paddle type, bulk material level sensor offered with a wide variety of paddle options for unequaled application versatility. It is easy to install and requires no special tools or calibration

The Pulse Point™ II is an electronic vibratory level control especially effective in lightweight powders and granular solids. Because the Pulse Point senses material using a mechanical principle, the dielectric constant of the material is irrelevant.

With no moving parts and high sensitivity, the VRF® II is close to a perfect electronic level switch. VRF II technology determines the optimal frequency to maximize sensitivity based on calibration once installed in the tank. The special probe design compensates for material build-up.

The GP-4™ and Mark4™ Yo-Yo™ sensors are designed to provide accurate and reliable inventory management information for tanks and silos. The Yo-Yo™ combines proven mechanical design with a modern electronic communications interface.

The TDR-2000 guided wave radar uses a cable to guide a microwave signal. Instead of hoping for a return signal in a dusty, noisy process environment, the TDR-2000 guides the signal to the material surface and back again.

The ORB™ Remote Inventory System transforms inventory and process data into management information that can increase productivity and reduce supply chain costs.

Established in 1936, Bindicator® has built level switches to solve the toughest bulk material handling challenges. We have more history and experience with dry bulk level measurement than any other company.