▪Designed mainly for ambiance
▪Generates enough heat in the event of a power failure
▪EPA qualified under the Low Mass program
▪Incomparable view on the flames
▪Molded refractory stones
▪176 CFM blower included
▪Firescreen doors included
▪Cast iron andirons included
▪8" Ventis stainless steel anchor plate included
▪Fresh air intake adapter included
Required option: traditional faceplate (VBA1520)
Appliance performance
Fuel type | Dry cordwood |
---|---|
Recommended heating area (2) | < 1,500 ft² |
Overall firebox volume | 4.25 ft³ |
Burn rate | > 5 kg/h (> 11 lb/h) |
Average particulate emission rate (1) | 2.9 g/kg |
- 1. This appliance is officially tested and certified by an independent agency.
- 2. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
General features
Premium quality blower included (CFM) | 176 CFM included |
---|---|
Certified according to applicable standards | CAN/USA accredited laboratory |
Flue outlet diameter | 8" |
Recommended chimney diameter | 8" |
Type of chimney | ULC S604, ULC S629, UL S610, UL 103 HT (2100 °F) |
Minimum chimney height | 15" |
Overall dimension (Width) | 41 1/8" |
Overall dimension (Height) | 43 5/8" |
Overall dimension (Depth) | 27 1/4" |
Door type | Double, glass with cast iron frame |
Door opening size (Width) | 30" |
Door opening size (Height) | 16 1/2" |
Glass type | Ceramic glass |
Glass surface - W x H | 28 1/2" x 17 1/8" |
Firebox size (Width) | 23 1/8" |
Firebox size (Height) | 18 5/8" |
Firebox size (Depth) | 11 3/8" |
Maximum log length | 20" |
Log positioning | Loading over width |
High-efficiency certified appliance | Exempt |
Canadian Standard (safety) | ULC-S610 |
USA Standard (safety) | UL 127 |
Warranty | Lifetime limited |
Shipping weight | 511 lb (232 kg) |
Combustion technology | Non-catalytic |
USA Standard (emissions) | ASTM 2515 / ASTM 2558 |
Canadian Standard (emissions) | ASTM 2515 / ASTM 2558 |
Clearances
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
Canada | United-States | |||
Clearances - Base of the unit to ceiling** | 72" | 72" | ||
Clearances - Combustible top mantle to unit | 5 1/2" | 5 1/2" | ||
Clearances - Combustible side mantle to unit | 0" | 0" | ||
Clearances - Combustible side wall to unit | 24" | 24" | ||
Clearances - Base of the unit to a combustible shelf | 48" | 48" | ||
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites). **Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual. |