HE350 Ventis Wood Fireplace

By Ventis

No reviews yet Write a Review
$5,549.00
SKU:
HE350
Width:
43.00 (in)
Height:
45.00 (in)
Depth:
31.00 (in)
Shipping:
Calculated at Checkout

Financing Available!

Quantity:

In Stock

Special Handeling required. Please call
Adding to cart… The item has been added

â–ªDesigned mainly for heating large spaces
â–ªPatented design of the intelligent air control mechanism
â–ªLuxurious effect created by an eye-catching fireplace
â–ªLarge glass surface
â–ªEPA 2020 certified
â–ªNon-catalytic combustion technology
â–ªInstallation authorized on the Island of Montreal
â–ªFirestop made of high density insulation board
â–ª176 CFM blower included
â–ª8" Ventis stainless steel anchor plate included
â–ªFresh air intake adapter included

Required option: traditional faceplate (VBA1540) and molded refractory bricks (AC02360)

Appliance performance

Fuel type Dry cordwood (16" recommended)
Recommended heating area (9) 1,000 - 2,800 ft²
Overall firebox volume 4.28 ft³
EPA loading volume 4.28 ft³
Maximum burn time (9) 11 h
Maximum heat output-dry cordwood (4) 95,000 BTU/h
Minimum overall heat output rate (4) (5) 16,900 BTU/h (5.0 kW)
Maximum overall heat output rate (4) (5) 43,000 BTU/h (12.6 kW)
Average overall efficiency-dry cordwood (HHV) (5) (6) 64 %
Average overall efficiency-dry cordwood (LHV) (5) (7) 69 %
Optimum efficiency (1) (2) 70 %
Optimum heat transfer efficiency (8) 69 %
Average particulate emission rate (3) 1.6 g/h
Average CO (10) 159.0 g/h
  • 1. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
  • 2. Optimum overall efficiency at a specific burn rate (LHV).
  • 3. This appliance is officially tested and certified by an independent agency.
  • 4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
  • 5. As measured per CSA B415.1-10 stack loss method.
  • 6. Higher Heating Value of the fuel.
  • 7. Lower Heating Value of the fuel.
  • 8. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
  • 9. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
  • 10. Carbon monoxyde.

General features

Premium quality blower included (CFM) 176 CFM included
Certified according to applicable standards CAN/USA accredited laboratory
Combustion technology Non-catalytic
Stainless-steel secondary-air system Yes
Flue outlet diameter 8"
Recommended chimney diameter 8"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height 15"
Overall dimension (Width) 45 1/4"
Overall dimension (Height) 43 3/8"
Overall dimension (Depth) 31 3/4"
Door type Double, glass with cast iron frame
Door opening size (Width) 33"
Door opening size (Height) 12 3/4"
Glass type Ceramic glass
Glass surface - W x H 29 3/4" x 13 1/2"
Firebox size (Width) 25 3/8"
Firebox size (Height) 25 3/8"
Firebox size (Depth) 17 7/8"
Maximum log length 25"
Log positioning Loading over width
Baffle type High density insulation board
High-efficiency certified appliance Yes, EPA 2020 certified
Canadian Standard (emissions) CSA B415.1-10
USA Standard (emissions) EPA / ASTM WK47329
Canadian Standard (safety) ULC S610
USA Standard (safety) UL 127
Warranty Lifetime limited
Shipping weight 555 lb (252 kg)

Clearances

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)

  Canada United-States
Clearances - Base of the unit to ceiling** 84" 84"
Clearances - Combustible top mantle to unit 84" 84"
Clearances - Combustible side mantle to unit 8" 8"
Clearances - Combustible side wall to unit 24" 24"
Clearances - Base of the unit to a combustible shelf N.A. or 52" non-combustible N.A. ou 52" incombustible
 

Related Products

Spring Collection 2024