Name: HES140 Ventis wood stove
Brand: Ventis
SKU: HES140
Price: 1899 CAD
Availability: InStock

Description

▪Small wood stove on pedestal
▪EPA certified at only 1.8 g/h
▪Solidity and manufacturing quality
▪Non-catalytic combustion technology
▪Installation authorized on the Island of Montreal
▪Cast iron door
▪Top heat deflector and side panels ▪Stainless steel heat shield added to the firestop

[Tax Credit Qualification | Efficency Data Summary]

Appliance performance

Fuel type	Dry cordwood (16" recommended)
Recommended heating area (9)	250 - 1,200 ft²
Overall firebox volume	1.8 ft³
EPA loading volume	1.55 ft³
Maximum burn time (9)	5 h
Maximum heat output-dry cordwood (4)	45,000 BTU/h
Minimum overall heat output rate (4) (5)	12,124 BTU/h (3.55 kW)
Maximum overall heat output rate (4) (5)	26,700 BTU/h (7.83 kW)
Average overall efficiency-dry cordwood (HHV) (5) (6)	74 %
Average overall efficiency-dry cordwood (LHV) (5) (7)	79 %
Optimum efficiency (1) (2)	80 %
Optimum heat transfer efficiency (8)	79 %
Average particulate emission rate (3)	1.8 g/h
Average CO (10)	74 g/h

1. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
2. Optimum overall efficiency at a specific burn rate (LHV).
3. This appliance is officially tested and certified by an independent agency.
4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
5. As measured per CSA B415.1-10 stack loss method.
6. Higher Heating Value of the fuel.
7. Lower Heating Value of the fuel.
8. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
9. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
10. Carbon monoxyde.

General features

Alcove installation approved	Yes
Mobile home approved	Yes, with fresh air intake
Certified according to applicable standards	CAN/USA accredited laboratory
Overall dimension (Width)	20''
Overall dimension (Height)	30 1/4''
Overall dimension (Depth)	29''
Premium quality blower included (CFM)	Optional
Combustion technology	Non-catalytic
Stainless-steel secondary-air system	Yes
Flue outlet diameter	6"
Recommended chimney diameter	6"
Type of chimney	CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height	12'
Door type	Single, glass with cast iron frame
Door opening size (Width)	12"
Door opening size (Height)	7 5/8"
Glass type	Ceramic glass
Glass surface - W x H	10 1/8" x 8 1/4"
Steel thickness-body	3/16"
Steel thickness-top	5/16"
Firebox size (Width)	14 1/4"
Firebox size (Height)	11 3/4"
Firebox size (Depth)	19 1/8"
Log positioning	Loading over depth
Maximum log length	17"
Firebox lined with refractory bricks	Yes
Baffle type	High quality vermiculite
High-efficiency certified appliance	Yes, EPA 2020 certified
Canadian Standard (emissions)	CSA B415.1-10
USA Standard (emissions)	EPA
Canadian Standard (safety)	ULC S627
USA Standard (safety)	UL 1482, UL 737
Warranty	Limited lifetime
Shipping weight	282 lb (128 kg)

Clearances

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)

	Canada		United-States
	Single wall pipe	Double wall pipe	Single wall pipe	Double wall pipe
Clearances - Base of the unit to ceiling**	84"	84"	84"	84"
Clearances - Corner	11"	6"	11"	6"
Clearances - Back wall	14"	6"	12"	6"
Clearances - Side wall	12"	12"	12"	12"

The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites). *Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.