Max Caddy Hot Air Wood Furnace

***Only available in Canada***

• Product Brochure
• Furnace Dimensions
• Installation & Operation
• Owners Manual

Ingenuity 2.0

Thanks to its electronic platform facilitating connections between systems, PSG's largest furnace is the best option for your home heating and air conditioning system.

The power to communicate

Max Caddy’s new streamlined electronic platform makes it easy for different systems to talk to each other. Heat pumps, air conditioners, humidifiers-the Max Caddy easily communicates with all of these appliances using standard industry symbols and practices. Easy-to-identify input and output ports and a blower assembly with prewired main board simplify installation and hookup. And PSG’s touchscreen LCD control module makes input and output control a breeze. 

A benchmark for efficiency

The Max Caddy’s integrated control PC board and RTD probe automatically ensures that the furnace blower is operating at optimum speed, keeping the plenum at just the right temperature. The built-in heat exchanger system ensures that heat is transferred quickly and efficiently via the smoke ducts inside the furnace instead of being lost up the chimney. The result is superior comfort and energy efficiency, with savings of up to 30% on firewood.

Multi-energy flexibility and peace of mind

The Max Caddy can be installed as a wood-only unit, but is also available in wood+electric, wood+oil combo, or even wood+oil+electric triple combo configurations so you can heat your home using multiple energy sources. With Caddy series furnaces, you’ll always have an alternate source of heat to ensure the comfort and safety of your family.

Wood Add-on

If you’ve already got an oil, gas, or electric central heating system but want to add the flexibility of wood, the Max Caddy wood add-on furnace is for you. This unit, which installs on either side of your existing system, uses the same controls and fan as your existing furnace, giving you a fully compatible wood+oil, wood+gas, or wood+electric combo system.

Appliance performance ⁽²⁾

⁽¹⁾ Based on delivered heat output.

⁽²⁾ Values are as measured per CSA B415.1-10, except for the recommended heating area, firebox volume, maximum burn time and maximum input capacity. Performances based on a fuel load prescribed by the standard at 10 lb/ft³ and with a moisture content between 18% and 28%.

⁽⁾ Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type and other variables. The recommended heating area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature considering that the space configuration and the presence of heat distribution systems have a significant impact in making heat circulation optimum.

⁽³⁾ Input value at 10 lb/ft³ fuel loading density and dry energy value of 8,600 BTU/lb.

⁽⁴⁾ Overall : Radiated and delivered heat together at 10 lb/ft³ fuel loading density over one total burn cycle.

⁽⁵⁾ Efficiency based on radiated and delivered heat when allowing cycling from high to low burn to simulate thermostat demand.

⁽⁶⁾ Higher Heating Value of the fuel.

⁽⁷⁾ Lower Heating Value of the fuel.

⁽⁸⁾ Delivered: Remotely provided to other rooms through ducting at 10 lb/ft³ fuel loading density over one total burn cycle.

⁽⁹⁾ Efficiency based on delivered heat when allowing cycling from high to low burn to simulate thermostat demand. LHV % is based on manufacturer’s estimation.

⁽¹⁰⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽¹¹⁾ This appliance is officially tested and certified by an independent agency.

⁽¹²⁾ Carbon Monoxyde. Based on overall heat output at 10 lb/ft³ fuel loading density.

⁽¹³⁾ Unless stated otherwise, measures were taken directly at the main power source and include all electrical components present in the appliance.

General features

Note to the consumer: There are various Government imposed Air Quality Regulations as well as Building Codes across Canada that have guidelines in regards to the installation of wood, pellet/biomass boilers. Before purchasing any of these products you should consult with your local building, bylaw departments as well as your home insurance company.