SimpliPhi- AmpliPHI 3.8Kw Lithium Battery
By SimpliPHI
250-547-7971
- SKU:
- Amp3.8-48
- Width:
- 14.00 (in)
- Height:
- 14.00 (in)
- Depth:
- 8.00 (in)
Financing Available!
Make It A Bundle
- Product Spec Sheet
- Warranty Sheet
- Installation Manual
- PHI Series Wiring Guide
- UL 1973 Authorization to Mark
SimpliPhi Power’s AmpliPHI 3.8™ Battery utilizes the safest Lithium Ion chemistry available, Lithium Ferro Phosphate (LFP).
No cobalt or explosive hazards that put customers at risk. By eliminating cobalt, the risk of thermal runaway, fire propagation, operating temperature constraints, and toxic coolants are reduced.
The AmpliPHI features a Battery Management System (BMS) with closed loop communications pre-configured for industry leading inverters that reports SOC and other critical real-time data,
optimizing the value of storage and functionality within balance-of-system equipment. Combined with our proven overcurrent protection (OCPD) and accessible 100 Amp DC breaker On/Off switch,
installation time is reduced and safety is increased during set-up for residential and commercial systems, on and off- grid. Designed to scale up to 75 batteries,
the AmpliPHI integrates seamlessly with Sol-Ark and SMA, with other inverter brands being added soon.
| CHEMISTRY | Lithium Ferro Phosphate (LFP) The safest Lithium Ion chemistry available No cobalt, risk of thermal runaway or fire |
| OCPD | Built-in accessible 100 Amp DC breaker On/Off switch |
| BMS | Built-in Battery Management System with Communications |
| COMPATIBILITY | Compatible with Sol-Ark, SMA (pending) & Schneider (pending) Inverters |
| MAINTENANCE | Maintenance-free No ventilation, cooling or thermal regulation required |
Specifications
| AmpliPHI 3.8 kWh Module | AmpliPHI 48V |
|---|---|
| SKU | AmpliPHI-3.8-48 |
| DC Voltages – Nominal | 51.2 VDC |
| Amp-Hours | 75 Ah |
| Rated kWh Capacity @ C/2 | 3.8 kWh DC @ 100% DOD 3.04 kWh DC @ 80% DOD |
| Maximum Quantity Per System | 75 (285kWh) |
| MAX Discharge Rate (10 minutes) | 100 Amps DC (5.1 kW DC) |
| MAX Continuous Discharge Rate | 37.5 Amps DC (1.9 kW DC) |
| MAX Continuous Charge Rate | 37.5 Amps DC (1.9 kW DC) |
| DC Voltage Range1 | 48 VDC to 56 VDC |
| Depth of Discharge1 | up to 100% |
| Charge Temperature1 | 32° to 120°F (0° to 49°C) |
| Operating Temperature1 | -4° to 140°F (-20° to 60°C) |
| Storage Temperature1 | 6 months: 14° to 77° F (-10° to 25° C) 3 months: -4° to 113° F (-20° to 45° C) |
| Self-Discharge Rate | <1% loss per month |
| Cycle Life | 10,000+ (@80% DOD) |
| Memory Effect | None |
| Warranty Period | 10 Years |
| Weight | 86 lbs. (39.0 kg) |
| Dimensions | 13.5 x 14 x 8 in. (15.5” H w/terminals) / 0.88 ft3 (34.3 x 35.6 x 20.3 cm / 0.025 m3) |
| Model Number | AmpliPHI3.8-48 |
1. Max operating conditions. Refer to Installation Manual for recommended conditions.
- All specifications listed are typical/nominal and subject to change without notice.
- UN 3480, Lithium Ion battery contained in equipment, 9, II
- UL, CE, UN/DOT and RoHS compliant components – UL 1642, UL 1973, UL 9540A Test Approved
- Designed and manufactured in California, USA
Section 1.0 – Limited Pro-Rated Warranty
Coverage
The SimpliPhi Power AmpliPHI 3.8™, PHI 3.8™, PHI 3.8-M™, PHI 2.9™, PHI 1.4™ and PHI 730™ Batteries (the
“SimpliPhi Power Product”) as manufactured and sold by SimpliPhi Power, Inc., a Delaware corporation, are
warranted (the “Limited Warranty”) by SimpliPhi Power, Inc. against manufacturing defects in materials and
workmanship for a period of ten (10) years (the “Limited Warranty Period”) on a prorated basis, when installed
and operated within the specifications provided in the SimpliPhi Installation Manual and relevant Integration
Guide (refer to SimpliPhi’s Product Documentation web page for relevant documentation:
https://simpliphipower.com/product-documentation/).
Discharging PHI batteries to a voltage level below the 100% Depth of Discharge (DOD), level Voids the
batteries’ Warranty.
Over the ten-year Limited Warranty Period, SimpliPhi warrants the SimpliPhi Power Product at 80% or greater
of its original-rated capacity.
-
SimpliPhi’s AmpliPHI Battery Communications Setup w/ Sol-Ark
In this video, we will guide you through the wiring & programm...
-
How to connect a lug to the terminals on a SimpliPhi Power battery
In this video, we will demonstrate how to appropriately affix ...
-
Connecting a busbar to terminals on a SimpliPhi battery
This is a quick tutorial on how to properly connect a busbar t...
-
Paralleling PHI Batteries with Threaded Studs Using Battery Cables
In this video, you will learn how to wire SimpliPhi Power Batt...
-
Paralleling PHI Batteries using Busbars
In this video, you will learn how to wire SimpliPhi Power Batt...
Related Products
